UL 508A Control Panels, Built in Tampa Bay
Motor control centers, VFD panels, safety relay systems, and custom NEMA enclosures, designed, fabricated, and labeled in-house.
Ships documentation-ready
Every panel we build is designed, fabricated, and labeled to the UL 508A standard, which means it ships documentation-ready. Your AHJ accepts the listing mark without a field evaluation, your insurance carrier gets the coverage documentation they need, and your maintenance team gets a nameplate with SCCR calculated and marked per NEC Article 409, backed by a full BOM, wiring diagrams, and I/O schedule.
What we build
Motor control centers, machine control panels, VFD and soft-starter panels, safety relay systems, power distribution panels, and custom NEMA-rated enclosures, all built to UL 508A, NFPA 79, NEMA ICS 1-2022, IEC 60204, and OSHA 29 CFR 1910 Subpart S. As-built drawings and component datasheets are available on request for code inspectors and AHJs.
Why ICS?
UL 508A Certified
Every panel we build is fabricated and labeled to UL 508A standard, in-house.
Local Largo Shop
Pinellas County shop with fast turnaround, with no shipping panels across the country.
CAD Through Commissioning
Design, fabrication, and on-site startup, all under one roof, one point of contact.
How it works
Retrofit Assessment
We walk the plant, inventory every control platform, and hand you a written report: what is obsolete, what a failure would cost, and what we would recommend.
Written Scope
A fixed-price proposal for the retrofit, with a schedule that works around your production calendar.
Build, Install, Commission
Panel built and tested in our Largo shop, installed on your timeline, commissioned on-site with your team.
Frequently asked questions
Our shop is authorized by UL to apply the UL label to the panels we build, following their listing requirements. Your AHJ accepts that label without a separate field evaluation.
Motor control centers, machine control panels, VFD and soft-starter panels, safety relay systems, power distribution panels, and custom NEMA-rated enclosures.
Yes. As-built drawings and component datasheets are available on request.
Have a panel spec or drawing already?
Send it with your Retrofit Assessment request and we’ll start scoping the build.